Bosch CL300 Manual page 114

System Modules
Connection
Slot
Specifications
Ordering Information
4−62
The connection is made through a 0.55 m cable and the two 50−pin fe
male connectors on the module front panel. These two connectors are
connected in parallel so that the connection can optionally be made us
ing the upper or the lower connector.
The AG/Z is to be installed in slot 14 of the GG300/301 and in slot 8 of the
GG300−K/301−K basic unit. It can be installed in slots 1, 2, 13 or 14 in
expansion units, depending on the configuration. For further information
see paragraph 2.1.12.5.
Width
Cable length between 2 Expansion Modules
Internal Power Consumption
AG/Z Central Expansion Module
Interconnection Cable 0.55 m
Flexible Automation
1 module width
0.55 m
12 V/10 mA
Order No.
041 523
041 535