Change Ip-Address - MC Technologies MC100 Terminal User Manual

MC100
Mobile programmable gateway

9.10 Change IP-address

Change using Command Prompt
Open the Command Prompt to login your device:
1. Type: ssh root@192.168.2.1
2. Type the password.
3. Open the configuration file using command: vim /etc/config/network
4. Press "i" to enter the input mode, and change the line "option ipaddr" in the
5. If the MC100 is to go online via a router, the line option gateway
6. Then press Escape to save the file, and then type :wq and press Enter.
7. Finally, type service network reload and press Enter.
Restart the network services with the new settings. After a few seconds the MC100
has the new IP address. If necessary, the network connection at the host PC must be
briefly disconnected and reconnected so that the PC can obtain a new IP.
Change using LuCi Web Interface
1. Using LuCi Web interface, login to your MC100.
2. Go to Network Interfaces.
3. Under LAN Click on "EDIT".
4. Under "General Settings", change "IPv4 address".
5. Click on "SAVE", and then click on "SAVE & APPLY"
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
interface "lan" to the corresponding address.
'aaa.bbb.ccc.ddd' can be added (with the IP address of the router).
17