Table of Contents
Advertisement
Mounting the UPS in a 23" Rack
To install the UPS in a 23" rack configuration using the supplied
hardware:
1.
Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
2.
On each side of the UPS, attach the short end of a mounting
bracket to the UPS using two of the M3
Figure 11).
NOTE Rails cannot be used for 23" cabinets. Confirm that you have a rack tray.
3.
Slide the rack tray into the rack and slide the UPS onto the tray.
4.
Secure the front of the UPS to the rack using the supplied hardware
(two M6
Figure 12).
Figure 12. Securing the UPS in a 23" Rack
t
Avaya
Line Interactive RM UPS Site Preparation, Installation and Operator's Manual
Mounting Bracket
Rack Tray
Figure 11. Rack Tray and Mounting Bracket for a 23" Rack
×
10 screws and two clip nuts on each side, as shown in
INSTALLATION
×
6 screws (see
×
M3
6
Bracket
Screws
S
164201663 Rev 1
29
Advertisement
Table of Contents
