Table of Contents
Advertisement
Product Specific Problems
Specific
Symptoms
Screen image
is too small
Cannot adjust
the monitor
with the
buttons on the
front panel
No Input Signal
when user
controls are
pressed
The picture
does not fill
the entire
screen
│
92
Troubleshooting
What You
Experience
Image is
• Check the Aspect Ratio setting in the
centered on
screen, but
• Reset the monitor to factory settings.
does not fill
entire viewing
area
OSD does not
• Turn Off the monitor, unplug the power cord,
appear on the
screen
• Check whether the OSD menu is locked. If
No picture,
• Check the signal source. Ensure the computer
the LED light
is white
• Check whether the signal cable is plugged in
• Reset the computer or video player.
The picture
• Due to different video formats (aspect ratio)
cannot fill the
height or
width of the
• Run the built-in diagnostics.
screen
Possible Solutions
Display menu OSD.
plug it back, and then turn On the monitor.
yes, toggle and hold the Joystick for 4
seconds to unlock (for more information, see
Lock).
is not in the Standby Mode by moving the
mouse or pressing any key on the keyboard.
properly. Re-plug the signal cable if
necessary.
of DVDs, the monitor may display in full
screen.
Advertisement
Table of Contents
