Table of Contents
Advertisement
Firmware
Service Tag
Acknowledge
SDK access
Reset Others Reset all settings under the Others menu to the factory
Factory Reset Reset all settings to the factory preset values.
OSD Warning Messages
When the monitor does not support a particular resolution mode, you will see the
following message:
NOTE: The message may be slightly different according to the
connected input signal.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 3840 x 2160.
Displays the firmware version of your monitor.
Displays the service tag serial number of your monitor.
Allows you to set the Acknowledge SDK access
function to On or Off.
preset values.
NOTE: The following settings will not reset after
Factory Reset: Calibration and validation data,
language, and date and time.
Monitor Specifications
for the Horizontal and Vertical
Operating the Monitor
│
67
Advertisement
Table of Contents
