Connecting The Usb Type-C To Type-A Cable - Dell UltraSharp UP3221Q User Manual

NOTE: If you are using a computer with USB-C DP connection, please
purchase the USB-C DP cable separately. For more information, go to:
http://www.dell.com.
NOTE: For information on purchasing a Thunderbolt™ 3 Passive cable,
go to: Purchasing a Thunderbolt™ 3 Passive

Connecting the USB Type-C to Type-A cable

NOTE: To prevent data damage or loss, before unplugging the USB
upstream port, make sure that NO USB storage devices are in use by
the computer connected to the monitor's Thunderbolt™ 3 upstream
port.
After you have completed connecting the DisplayPort/HDMI cable, follow the
procedures below to connect the USB Type-C to Type-A cable to the computer
and complete your monitor setup:
1. Connect the computer: connect the Thunderbolt™ 3 upstream port with the
USB Type-C end of the cable (cable supplied).
2. Connect the USB Type-A end of the cable to an appropriate USB port on your
computer.
3. Connect the USB peripherals to the SuperSpeed USB 5/10 Gbps (USB 3.2
Gen 1/2) downstream ports on the monitor.
NOTE: The transfer speed for this connection is 5 Gbps.
4. Plug the power cables for your computer and monitor into a nearby outlet.
5. Turn On the monitor and the computer. 
If your monitor displays an image, installation is complete. If it does not display
an image, see Common Problems.
Cable.
Setting Up the Monitor
│
39