Connecting The Monitor For Thunderbolt™ Multi-Stream Transport (Mst) Function - Dell UltraSharp UP3221Q User Manual

Connecting the monitor for Thunderbolt™ Multi-Stream Transport (MST)
function
NOTE: UP3221Q supports the Thunderbolt™ MST feature. To make use
of this feature, your PC must support Thunderbolt™ feature.
The default out of factory setting in the UP3221Q is Alternate Mode DP1.4.
To set up MST connection, please use only Thunderbolt™ 3 Active cable that came
with your monitor and perform the below steps:
1. Turn Off your computer and disconnect the power cable.
2. Connect the Thunderbolt™ 3 Active cable from the Thunderbolt™ upstream
port of Monitor One to your computer or device.
3. Connect the other Thunderbolt™ 3 Active/Passive cable or USB Type-C
cable from the Thunderbolt™ downstream port of Monitor One to the
Thunderbolt™ upstream port of Monitor Two. Refer to the following table for
available types of cable.
You can use the following cable type for MST connection:
Host
Thunderbolt™ 3
Thunderbolt™ 2
USB Type-C
* Thunderbolt™ 3 (USB Type-C) Active Cable
** Thunderbolt™ 3 (USB Type-C) Passive Cable
NOTE: Use the Thunderbolt™ 3 Active cable that came with your
monitor.
│
38 Setting Up the Monitor
UP3221Q Monitor One
Active cable*
Active or Passive cable
Passive cable**
UP3221Q Monitor Two
Active cable*
Passive cable**
USB Type-C cable
N/A
N/A