Digital Cinema
Masking
Markers
Marker Color Adjusts the Marker Color to Gray, Red, Green, or
Set Video Data
Range
Overscan
Frame by 5%
Show Blue
Channel only
Sharpness
│
52
Operating the Monitor
Adjusts the Digital Cinema Masking to Entire DCI
Container, DCI 1.85:1, DCI 2.39:1, DCI 2.35:1 or
Masking Opacity.
NOTE: When Masking Opacity is selected, toggle the
Joystick up or down to adjust the level.
Adjusts the Markers to No Markers, 1.85:1, 2.39:1,
2.35:1, 2:1, 1:1, 16:9 Extraction, 16:9 Action Safe,
16:9 Title Safe, 4:3 Extraction, 4:3 Action Safe, 4:3
Title Safe, Center Crosshair, or Thirds.
Blue.
Adjusts the Set Video Data Range to Auto, Full, or
Limited.
Allows you to set the Overscan Frame by 5% On or
Off.
NOTE: This function will only apply to the main window
in PBP Mode.
Allows you to set the Show Blue Channel only to On
or Off.
NOTE: This function will only apply to the main window
in PBP Mode.
This feature can make the image look sharper or softer.
Toggle the Joystick up or down to adjust the sharpness
from '0' to '100'.