Table of Contents
Advertisement
Product Features
The Dell UP3221Q flat panel display has an active matrix, Thin-Film Transistor
(TFT), Liquid Crystal Display (LCD) and mini LED backlight. The monitor features
include:
• 80.01 cm (31.5 in.) viewable area display (measured diagonally).
3840 x 2160 (16:9) resolution, plus full-screen support for lower resolutions.
• Wide viewing angle to allow viewing from a sitting or standing position.
• Color gamut of CIE1976 DCI-P3 99.8% with an average ΔE < 2.
• Manually select Gamma/White Point/Color Gamut/Luminance via User 1,
User 2, or User 3 Color Space options.
• Manual HDR mode without HDR signal via User 1, User 2, or User 3 options,
allowing force selection of HDR EOTF between ST.2084(PQ) and HLG.
• Calibrate User 1, User 2, or User 3 settings directly in CAL 1 or CAL 2.
• Supports HDMI, DP, and Thunderbolt™ 3 sources.
• HDMI, DP, and Thunderbolt™ 3 connection supports 10-bit color.
• Frame Buffering allows 24/25 Hz video to be displayed in 48/50 Hz at
10-bit color.
• Single Thunderbolt™ 3 to supply power (Up to 90 W) to a compatible
notebook while receiving video & data signal.
• Built-in Color Calibration functionality.
• Multi-Stream Transport (MST) capability via Thunderbolt™ 3 connection.
• Tilt, swivel, pivot, and vertical extension adjustment capabilities.
• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling
easier setup with an elegant viewing experience.
• Removable stand and Video Electronics Standards Association (VESA™)
100 mm mounting holes for flexible mounting solutions.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Supports Joystick, Power button and Color lock via OSD.
• Security lock slot.
• 0.5 W standby power when in the sleep mode.
• Supports Picture by Picture (PBP) select mode.
About Your Monitor
│
9
Advertisement
Table of Contents
