OSD warning messages
When the monitor does not support a particular resolution mode you will see the
following message:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 3840 x 2160.
Before the DDC/CI function is disabled, the following message is displayed:
When the monitor enters the Standby Mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the
On-Screen Display (OSD)
40
Operating the monitor
|
Dell 55 Monitor
The current input timing is not supported by the monitor display.
Please change your input timing to
other monitor listed timing as per the monitor specifications.
Monitor specifications
Dell 55 Monitor
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
Yes
Dell P2418HZ
Dell 55 Monitor
Going into Standby Mode...
menu.
3840x2160, 60Hz
or any
for the horizontal and vertical
No
P5524Q
P5524Q
P5524Q
Using the