Connecting your monitor
WARNING: Before you begin any of the procedures in this section,
follow the
Safety
NOTE: Do not connect all cables to the computer at the same time. It
is recommend to route the cables through the cable-management slot
before you connect them to the monitor.
To connect your monitor to the computer:
1. Turn Off your computer and disconnect the power cable.
2. Connect the DP/USB Type-C cable from your monitor to the computer.
Connecting the DP cable
DP
Connecting the monitor for DP Multi-Stream Transport (MST) function
DP
│
28
Setting up the monitor
Instructions.
DP
DP out
DP
DP