Start-Up - Arjo Provizio SEM Scanner Instructions For Use Manual

Start-up

Turn on Provizio SEM Scanner
By removing from the
The sensor head must remain
Charging Hub
untouched during this time
or
By pressing the Action Button
until the screen illuminates and
the Splash Screen displays
Installing the Sensor
1
After approximately 4 seconds the
Install Sensor Screen will display
4
PROVIZIO SEM SCAN N ER • PRODUC T TR AIN ING
0 1 2 3 4
2
Remove the Provizio SEM Scanner single-use sensor
from its packaging and place onto the sensor head.
You will hear a click when the sensor is placed
correctly
Each patient scanning session requires a new sensor
5 6 7
3
Press the Next Screen Button to continue, the
scanner will test the installation of the sensor
and then display the Mode of Operation Screen