Table of Contents
Advertisement
Global Settings, Wave Seq., Drum Kits
Saving Wave Sequences
Once you've spent all this time editing, you'll want to save
your work. To save your Wave Sequence edits:
1. Select the Write Wave Sequence command from the
page menu.
This brings up a dialog box which allows you to save the
Wave Sequence. Optionally, you can also select a new
location, or change the Wave Sequence's name.
2. Press the Wave Sequence name to bring up the text
edit dialog.
You can give the Wave Sequence a descriptive name
using the on-screen keyboard.
3. After entering the name, press OK.
The text edit window will disappear, returning you to the
main Save dialog.
4. Press the popup button next to WaveSeq to bring up
the save location dialog.
5. Select a location to save the edited Wave Sequence.
To avoid overwriting the factory sounds, it's safer to use a
slot in one of the User banks.
6. After selecting the location, press OK.
7. Press OK again to start the write process.
8. If you're sure you want to write to this location, press
OK again.
After that, you're done!
The Wave Sequence Tempo, Key Sync, Swing, and
Quantize Trigger settings are stored with each Program,
Combination, or Song. These parameters are provided on
the Wave Sequence pages for use during editing, but are
not actually saved with the Wave Sequence. If you've
moved from PROGRAM or COMBINATION mode and
edited these parameters, return to the previous mode and
write your edits.
192
Advertisement
Table of Contents
