Sampling And Editing In Sampling Mode; Creating Multisample Indexes And Sampling-Recording - Korg NAUTILUS Series Operation Manual

Sampling (Open Sampling System)

Sampling and editing in SAMPLING mode

In SAMPLING mode, you can record samples, and edit
sample data that you sampled or loaded from media
(including WAVE and AIFF formats). You can also assign
the edited samples to indexes (zones) to create a
multisample.
SAMPLING mode page structure
Page
• Sampling and resampling
Recording • Various settings for sampling
• Audio input settings
Sample Edit • Sample waveform editing
• Sample playback parameter settings
• Start, loop start, and end address settings
Loop Edit • Loop and reverse playback on/off
• Editing operations such as Time Slice and
Time Stretch
• Assign samples to multisamples, and
Multisample Edit
specify the zone and original key
EQ • EQ adjustments for multisample playback
• Select and edit insert effects, adjust send
IFX levels to the master effects, and specify the
routing to the outputs
• Select and edit master send effects and
MFX/TFX
total effects
Creating multisample indexes and sampling–Recording
Here's how to create indexes in a multisample, and assign a
sample to each index.
1. Press the MODE button to select SAMPLING, and
enter SAMPLING mode.
2. Select the Recording– Recording page.
3. Select "Multisample Select," and create a
multisample.
To create a new multisample, press the Multisample
Select popup button. Then press a Multisample No. in the
list for which no name has been entered.
Multisample Select
Popup
Index
Sample Select
132
Explanation
For details on how to access each mode and page, refer to
"Basic operations" on page 14.
Recording-related settings such as input level are made by
the parameters of Recording, and these settings are valid for
the other pages as well.
The selected multisample or sample can be played from the
keyboard in any page, allowing you to hear the results of
your editing in each page.
A dialog box will appear.
If you want to create a stereo multisample, check the
Stereo box, and press the OK button.
If you want to create a monaural multisample, uncheck
the Stereo box, and press the OK button.
Keyboard
Create
Create Zone
Preference