Part Identification Chart - Pro-Form XR 10.9 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see if it has been preassembled. Extra parts may be included.
M8 Locknut (22)
M6 Curved
Washer (21)
M8 Curved
Washer (23)
M10 Curved
Washer (26)
M10 x 45mm Screw (19)
M8 x 70mm Bolt (24)
M8 x 70mm Carriage Bolt (20)
M6 x 75mm Screw (18)
M8 x 75mm Bolt (17)
M8 x 80mm Bolt (27)
6
M6 x 16mm
Screw (15)