Adaptec ARO-1130U2 Installation And Hardware Manual page 76

ARO-1130U2 Installation and Hardware Guide
To complete the driver installation, edit the config.sys file to include
command lines for aspi8dos.sys and aspicd.sys , and edit the
autoexec.bat file to include a command line for mscdex.exe . The fol-
lowing examples illustrate the command line format and the com-
mand options appropriate for most systems:
Sample command lines for config.sys file:
device=c:\scsi\aspi8u2.sys /d
device=c:\scsi\aspicd.sys /d:aspicd0
Note:
For non-Ultra2 systems, use aspi8dos.sys
instead of aspi8u2.sys in the command line
(for example, device=c:\scsi\aspi8dos.sys /d).
Sample command line for autoexec.bat file:
c:\dos\mscdex.exe /d:aspicd0
(This assigns the CD-ROM the next available drive letter, typi-
cally D if there is only one DOS drive.)
The following tables describe the aspi8u2.sys (or aspi8dos.sys ) and
aspicd.sys command line options. For a description of mscdex com-
mand line options, see your Microsoft DOS documentation. You can
type command line options in uppercase or lowercase letters. Leave
a blank space between options.
D-2