Installing the Software Driver for Novell NetWare
Note:
To load the driver automatically at server bootup, make
sure the startup.ncf file includes the load command line for
the cda1000h.ham driver. (If you also have an Adaptec host
adapter that uses the Adaptec aic78xx.dsk driver, make sure
the driver loads after the cda1000h.ham driver.)
Note:
Older versions of the aic78xx.dsk driver (before v1.30)
are compatible with cda1000h.ham as long as the
ARO-1130U2 PCI slot is not specified on the command line
(e.g., load aic7870.dsk slot=z). If there is an AIC-78xx based
card (e.g., AHA-2940) in the system, z must point to that
card's slot number and not to the ARO-1130U2 slot number.
If loaded without command line parameters, NetWare lists
valid slot numbers. The ARO-1130U2 will be listed in the
parameter list; however, do not select it.
6-5