Adaptec ARO-1130U2 Installation And Hardware Manual page 69

d
Write down the series of resulting numbers, without all the
extra zeroes. In this example, it is 2, 3, 1, 101, etc. This is the
Tag value loading sequence for SCSI Miniport drivers. In
other words, when Windows NT loads these miniport
drivers, the one with Tag value 2 is loaded first, then the
one with Tag value 3, and so on.
10
Compare the Tag value loading sequence to the actual tag val-
ues of cda1000 and aic78xx that you determined in steps 4 and
5. If cda1000 is loading before aic78xx, skip to step 16. If
aic78xx is loading first, continue with the next step.
11
Expand the tree on the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Ser-
vices .
12
Select cda1000 on the left part of the screen. Click the right
mouse button on Tag Value on the right part of the screen and
select Modify from the pop-up menu.
13
Type the tag value of the aic78xx miniport driver in the space
provided and click OK.
14
Select aic78xx on the left part of the screen. Click the right
mouse button on Tag Value on the right part of the screen and
select Modify from the pop-up menu.
15
Type the tag value of the cda1000 miniport driver in the space
provided and click OK. You have now reversed the tag values
for the two miniport drivers, and the cda1000 driver will load
first.
16
Exit from the Registry Editor and from Windows NT. Then
shut down the server.
17
Physically install the AHA-2940 Family adapter in the expan-
sion slot.
18
Boot the server.
Using the ARO-1130U2 with Other Adaptec Products
B-9