Adaptec ARO-1130U2 Installation And Hardware Manual page 47

10
When NetWare detects device drivers for the server, you are
prompted to Add, Change, or Delete drivers as needed:
– Delete any Multiple Processor Support module that is
detected (for example, MPS14).
– Delete the Storage Adapters drivers for adapters that are
not present in your system.
11
Insert the Adaptec Array1000U2 Family Manager Set driver
diskette in your floppy drive.
12
Select Storage Adapters and press Enter.
13
To add Storage Adapter driver, press Insert.
14
Press Insert again to add an unlisted driver.
15
Press F3 to specify a different path. Enter the following path:
a:\netware
16
Select Return to Driver Summary and press Enter. CDA1000 is
listed as your storage adapter.
17
Remove the diskette from your floppy drive.
18
Select Continue.
19
Follow the procedures in your NetWare documentation to
complete the installation.
20
When installation is complete, restart the system to the
NetWare partition.
21
At the server prompt, down the server by entering
down
Installing the Software Driver for Novell NetWare
6-7