Adaptec ARO-1130U2 Installation And Hardware Manual page 33

8
Prepare the array as you normally would prepare a boot disk
drive for your operating system. See either Chapter 5, Installing
the Software Driver for Windows NT, Chapter 6, Installing the
Software Driver for Novell NetWare, or Chapter 7, Installing the
Software Driver for SCO UnixWare.
Note:
You cannot use this procedure to change the boot
order of a SCSI disk drive that is not part of an array. If you
want to do this, create a one-disk RAID 0 array from the
disk. (Data is not actually striped on a one-disk array.)
Creating an Array With the ArrayConfigU2 Utility
4-9