Download Print this page

Adaptec ANA-7711C/F Getting Started Manual

Nac adapter, gigabit ethernet toe network accelerator card
Hide thumbs Also See for ANA-7711C/F:

Advertisement

ANA-7711 GS.fm Page 0 Thursday, April 24, 2003 9:53 AM
ANA-7711C/F NAC Adapter
Gigabit Ethernet TOE
Network Accelerator Card
Getting Started Guide
R

Advertisement

loading

Summary of Contents for Adaptec ANA-7711C/F

  • Page 1 ANA-7711 GS.fm Page 0 Thursday, April 24, 2003 9:53 AM ANA-7711C/F NAC Adapter Gigabit Ethernet TOE Network Accelerator Card Getting Started Guide...
  • Page 2: Getting Started

    ANA-7711 GS.fm Page 1 Thursday, April 24, 2003 9:53 AM This Getting Started Guide describes how to install the ANA-7711C/F NAC adapter and how to install the driver for Red Hat version 8.0 and Red Hat version 8.0 SMP (symmetric multiprocessor). You can find more detailed information about your adapter in the Installation Guide on the CD.
  • Page 3 Gigabit Ethernet (GbE) copper (CAT 5 or CAT 6) or SC fiber cable Note: The cable is not included in the kit. To order cables for your NAC, see the Got Cables? flyer in the kit or visit Adaptec’s online store at www.adaptecstore.com 1000/100 Mbps full-duplex connection to the network.
  • Page 4 ANA-7711 GS.fm Page 3 Thursday, April 24, 2003 9:53 AM 4 Locate an unused and unobstructed 3.3-V keyed, 64-bit or 32-bit PCI expansion slot and remove the expansion slot cover. Save the slot cover screw for use in the next step. Slot cover screw Expansion slot cover...
  • Page 5 README file on the installation CD. 1 Login to the Red Hat desktop as root. 2 Add the ANA-7711 NAC to the list of configurable adapters: a Mount the NAC installation CD and go the appropriate directory on the CD. Select install-ana7711 from either the...
  • Page 6 ANA-7711 GS.fm Page 5 Thursday, April 24, 2003 9:53 AM The Devices tab in the Network Configuration window is displayed. Note the ethernet device numbers listed in the Device column. Later, you will need to select the next unused number to identify your NAC. 4 Click Add.
  • Page 7 ANA-7711 GS.fm Page 6 Thursday, April 24, 2003 9:53 AM The Select Device Type window is displayed. 5 Click Ethernet connection and click Forward.
  • Page 8 ANA-7711 GS.fm Page 7 Thursday, April 24, 2003 9:53 AM The Select Ethernet Device window is displayed. 6 Click Other Ethernet Card and click Forward.
  • Page 9 ANA-7711 GS.fm Page 8 Thursday, April 24, 2003 9:53 AM The Select Ethernet Adapter is displayed. 7 Select Adaptec ANA-7711 Network Accelerator Card (NAC) from the Adapter drop down list, and select the next unused eth device number for the NAC from the Device drop down list and click...
  • Page 10 ANA-7711 GS.fm Page 9 Thursday, April 24, 2003 9:53 AM The Configure Network Settings window is displayed. 8 Click Automatically obtain IP address settings with: or Statically set IP addresses: as appropriate. You can automatically obtain IP Address settings using dhcp. If you choose to enter static addresses, enter the NAC IP Address, Subnet Mask, and Default Gateway Address.
  • Page 11 ANA-7711 GS.fm Page 10 Thursday, April 24, 2003 9:53 AM...
  • Page 12 Adaptec, Inc. 691 South Milpitas Boulevard Milpitas, CA 95035 USA ©2003 Adaptec, Inc. All rights reserved. Adaptec and the Adaptec logo are trademarks of Adaptec, Inc. which may be registered in some jurisdictions. Stock Number: 513595-03, Rev. A CZ 04/03...

This manual is also suitable for:

Ana-7711cAna-7711f