Scsi Bus Termination (Aha-2740W And Aha-2742W Only); Bios And Device Configuration; Scsi Bus Termination Selection - Adaptec AHA-2740W User Manual

SCSI Bus Termination (AHA-2740W and AHA-2742W Only)

Select SCSI Bus Termination to configure SCSI termination on the
host adapter. Figure 3-11 displays your choices. The default setting
is ON for both the Low and High byte.
Host adapter termination is determined by which SCSI connectors
on the AHA-2740W/2742W have SCSI devices connected. Refer to
Termination on the SCSI Bus on page 2-9 for configuration options.
Wide SCSI Channel Interface Definitions
SCSI Bus Termination
( ) Low byte ON, High byte ON
( ) Low byte OFF, High byte OFF
( ) Low byte OFF, High byte ON
[Select=ENTER] [Cancel=ESC]
Figure 3-11. SCSI Bus Termination Selection

BIOS and Device Configuration

Select BIOS and Device Configuration to configure the BIOS and
SCSI device options. Figure 3-12 displays your choices.

BIOS and Device Configuration

( ) BIOS configuration
( ) Device configuration
<ESC>
Figure 3-12. BIOS and Device Configuration
A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
A A
AHA-2740W/2742W/2744W User's Guide
A A
A A Stock Number: 510647-00, Rev. A
A
A A Print Spec Number: 492897-00
A A
Current Date: 8/3/94
A A AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA
Configuring the Host Adapter
Page: 3-11
ECN Date: 8/9/94
AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
3-11
A
A A
A A
A A
A
A A
A A
AAAA A A A A