Host Adapter Bios Base Address; Host Adapter Bios Base Address Selection - Adaptec AHA-2740W User Manual

Host Adapter BIOS Base Address

Select Host Adapter BIOS Base Address to configure the BIOS base
address for the host adapter, or to disable the host adapter BIOS.
Figure 3-6 displays your choices. The default setting is a base
address of D8000h.
When choosing the base address, verify that there is no conflict with
other devices using the same address–often the configuration utility
will notify you if there is a conflict.
Note:
The BIOS must be enabled in order to boot from a
SCSI fixed disk drive attached to the host adapter.
Host Adapter BIOS Base Address
[Select=ENTER] [Cancel=ESC]
Figure 3-5. Host Adapter BIOS Base Address Selection
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A
A A
AHA-2740W/2742W/2744W User's Guide
A A
A A Stock Number: 510647-00, Rev. A
A
A A Print Spec Number: 492897-00
A A
Current Date: 8/3/94
A A AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA
Configuring the Host Adapter
BIOS Definitions
( ) D8000H
( ) CC000H
( ) D0000H
( ) D4000H
( ) DC000H
( ) E0000H
( ) E4000H
( ) E8000H
( ) BIOS disabled
Page: 3-7
ECN Date: 8/9/94
AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
3-7
A
A A
A A
A A
A
A A
A A
AAAA A A A A