Connecting 16-Bit External Wide Scsi Devices; Connecting A Second Internal Wide Scsi Device - Adaptec AHA-2740W User Manual

AHA-2740W/2742W/2744W User's Guide
2
Connect the other end of the 68-pin Wide SCSI ribbon cable to
the connector on the internal Wide SCSI device.
Internal SCSI
Device
Figure 2-14. 68-pin Internal Cable to Internal Wide SCSI Device
3
To connect two or more internal Wide SCSI devices to a SCSI
bus, obtain a 68-pin Wide SCSI ribbon cable with enough con-
nectors to accommodate all of your internal Wide SCSI devices.
Connect each Wide SCSI device to the additional connectors.
Internal SCSI
Device
Figure 2-15. Connecting a Second Internal Wide SCSI Device

Connecting 16-bit External Wide SCSI Devices

External devices are usually daisy-chained to the host adapter. This
means that a simple two-ended cable runs from the host adapter to
the connector on the first external device. A second connector on the
2-22
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A
A A
AHA-2740W/2742W/2744W User's Guide
A A
A A Stock Number: 510647-00, Rev. A
A
A A Print Spec Number: 492897-00
A A
Current Date: 8/3/94
AAAA AAAA A A AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA
To 1st Internal
SCSI Drive
ECN Date: 8/9/94
AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
To Host
Adapter
A
A A
A A
Page: 2-22 A A
A
A A
A A
AAAA AAAA AAAA A A A A