Scsi Selection Timeout; Scsi Bus Reset At Power-On; Scsi Selection Timeout Selection; Scsi Bus Reset At Power-On Selection - Adaptec AHA-2740W User Manual

AHA-2740W/2742W/2744W User's Guide

SCSI Selection Timeout

Select SCSI Selection Timeout to configure the time, in millisec-
onds, used by the host adapter during the SCSI Selection phase. Fig-
ure 3-9 displays your choices. The default setting is 256 milliseconds.
Lowering the SCSI Selection Timeout will speed up SCSI bus scans
considerably; however, before lowering this value, make sure that
all the devices on the SCSI bus can respond to the shorter selection
time.
Wide SCSI Channel Interface Definition
SCSI Selection Timeout
[Select=ENTER] [Cancel=ESC]
Figure 3-9. SCSI Selection Timeout Selection

SCSI Bus Reset at Power-on

Select SCSI Bus Reset at Power-on to enable or disable a SCSI bus
reset generated by the host adapter during its power-on
initialization, and after a hard reset. Figure 3-10 displays your
choices. The default setting is Enabled.
Normally, SCSI Bus Reset at Power-on should always be enabled.
Wide SCSI Channel Interface Definition
SCSI Bus Reset at Power-on
[Select=ENTER] [Cancel=ESC]
Figure 3-10. SCSI Bus Reset at Power-on Selection
3-10
A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
A A
AHA-2740W/2742W/2744W User's Guide
A A
A A Stock Number: 510647-00, Rev. A
A
A A Print Spec Number: 492897-00
A A
Current Date: 8/3/94
AAAA AAAA A A AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA
( ) 256 milliseconds
( ) 128 milliseconds
( ) 64 milliseconds
( ) 32 milliseconds
( ) Enabled
( ) Disabled
ECN Date: 8/9/94
AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
A
A A
A A
Page: 3-10 A A
A
A A
A A
AAAA AAAA AAAA A A A A