Wide Scsi Channel Interface Definitions; Stock Number: 510647-00, Rev. A Page; Current Date: 8/3/94; Ecn Date: 8/9/94 - Adaptec AHA-2740W User Manual

AHA-2740W/2742W/2744W User's Guide

Wide SCSI Channel Interface Definitions

Select Wide SCSI Channel Interface Definitions to display the fol-
lowing screen. Only one function displays and no other choices are
available.
Wide SCSI Channel Interface Definitions
SCSI Channel Interface
( ) Wide Channel, Differential SCSI
[Select=ENTER] [Cancel=ESC]
Figure 3-6. Wide SCSI Channel Interface Definitions

Host Adapter SCSI ID

Select Host Adapter SCSI ID to configure the SCSI ID (0-15) setting
for the host adapter. Figure 3-7 displays your choices. The default
setting is 7.
Note:
If any SCSI device is connected to the 50-pin internal
SCSI connector, the host adapter must be assigned a SCSI ID
that ranges from 0 to 7; SCSI ID 7 is recommended.
Each installed SCSI device must have a unique SCSI ID. SCSI ID 7 is
normally assigned to the host adapter; SCSI IDs 0 and 1 should be
reserved for SCSI hard disk drives.
3-8
A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
A A
AHA-2740W/2742W/2744W User's Guide
A A
A A Stock Number: 510647-00, Rev. A
A
A A Print Spec Number: 492897-00
A A

Current Date: 8/3/94

AAAA AAAA A A AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA

ECN Date: 8/9/94

AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
A
A A
A A
Page: 3-8 A A
A
A A
A A
AAAA AAAA AAAA A A A A