Bios And Device Configuration; Figure 3-10. Configuring Scsi Bus Termination; Figure 3-11. Bios And Device Configuration - Adaptec AHA-2740 User Manual

AHA-2740 Series User's Manual
SCSI Bus Termination
Select SCSI Bus Termination to enable or disable SCSI termination
on the host adapter. Figure 3-10 displays your choices. The default
setting is enabled.
Host adapter termination should be disabled only if you attach
SCSI devices to both internal and external connectors, since the
host adapter would then be in the middle of the SCSI bus. Refer
to Chapter 2, Getting Started for information on termination.
SCSI Bus Termination
Done=F10 <Edit Resources=F6>

Figure 3-10. Configuring SCSI Bus Termination

BIOS and Device Configuration

Select BIOS and Device Configuration to configure the BIOS
and SCSI device options. Figure 3-11 displays your choices.
( ) BIOS configuration
( ) Device configuration
<ESC>

Figure 3-11. BIOS and Device Configuration

3-12
Adaptec AHA-2740 Series User's Manual
Stock Number: 510381-00 / Rev. C
Print Spec Number: 491709-00 Rev C
Current Date: 9/1/93
SCSI Channel A Configuration
( ) Enabled
( ) Disabled
<Cancel=ESC>
BIOS and Device Configuration
(Page 3-12)
ECN Date: 9/14/93