Device Insertion - Adaptec RAIDStation RS/7F User Manual

Unpacking and Initial Setup
Figure 2-1. Grounding shelves within a 19 in. cabinet

Device Insertion

This section details how to install power supply units, disk drives, and Advanced
Cooling Modules (ACM). The installation of a RAIDStation7 rackmount Storage
Array is also covered. The position of the power supplies and the disk drives
within the RAIDstation7 Rackmount Storage Array is shown below. For the
tower version of the RAIDstation7 Storage Array, Figure 2-2 would be oriented
vertically, with bay 0 on top and bay 8 on the bottom.
Figure 2-2. Location of devices in tower or shelf
Bay 8
WARNING: Before attempting to install any of the components, ensure that
anti-static precautions have been taken. The minimum requirement is a
properly grounded anti-static wrist strap and grounding wire.
2-4
Connecting braid,
connected radially
from each shelf to
a common ground
point.
Bay 0