Unpacking And Initial Setup - Adaptec RAIDStation RS/7F User Manual

Unpacking and Initial Setup

Chapter 2: Unpacking and Initial Setup
Upon receipt, visually inspect the exterior of the packaging for any signs of dam-
age. If any damage is found, the shipping company and Adaptec must be notified
immediately, and they will advise you of the appropriate action. The cartons are
sealed using packaging tape, which should be carefully cut open in the normal
manner.
Remove the top foam layer from each box and exercise caution when lifting out
the components. At this point the contents should be verified against the packing
list and Adaptec should again be informed if any discrepancies exist. The devices
and power supply units are housed in anti-static packaging and anti-static precau-
tions must be observed during handling.
CAUTION: This equipment is intended only for installation in a restricted
access location.
2-1