The Agilent 83400-Series-At A Glance - Agilent Technologies 83400 Series User Manual

Source
83402C
83403C
W A R N I N G
W A R N I N G
Receiver
83410C
83411C/D
83412B
The Agilent 83400-Series—At a Glance
Agilent 83400-series sources
The Agilent 83400-series sources can be amplitude modulated by an external
RF source. They can be modulated with up to +14 dBm (about 25 mW) of RF
power.
Wavelength
1300 nm
1550 nm
Use of controls or adjustments or performance of procedures other
than those specified herein can result in hazardous radiation
exposure.
Do not enable the laser when no fiber or equivalent device is attached
to the OPTICAL OUTPUT connector.
Agilent 83400-series receivers
The receivers are used to demodulate lightwave signals. With no modulation
signal, lightwave receivers produce no electrical output. If the optical power
exceeds 3 mW, the front-panel OVER ILLUMINATION indicator lights. Power must
be decreased below 2.5 mW for the indicator to turn off.
Wavelength
1300/1550 nm
1300/1550 nm
850 nm
Unmodulated Modulation
Output Power Range
< 3.0 mW 300 kHz to 6 GHz
< 3.0 mW 300 kHz to 6 GHz
Demodulation Range
(sine wave)
300 kHz to 3 GHz
300 kHz to 6 GHz
300 kHz to 3 GHz
The Agilent 83400-Series—At a Glance
Optical
Fiber
µ
9/125 m
µ
9/125 m
Optical Fiber
µ
62.5/125 m
µ
9/125 m
µ
62.5/125 m
Laser
Type
DFB
DFB
iii