C A U T I O N
C A U T I O N
Exposing the Agilent 83400-series source or receiver module to temperatures
above 55°C may cause the optical fiber in the front-panel connector to shrink
and retract.
This product is designed for use in INSTALLATION CATEGORY II and
POLLUTION DEGREE 2, per IEC 601010 and 60664 respectively.
Measurement accuracy—it's up to you!
Fiber-optic connectors are easily damaged when connected to dirty or damaged cables
and accessories. The Agilent 83400-series' front-panel optical connector is no excep-
tion. When you use improper cleaning and handling techniques, you risk expensive
instrument repairs, damaged cables, and compromised measurements.
Before you connect any fiber-optic cable to the Agilent 83400-series source or receiver
module,
refer to "Cleaning Connections for Accurate Measurements" on page
Getting Started
Getting Started
2-11.
1-3