Getting Started
Inspecting the Shipment
Inspecting the Shipment
1 Verify that all components ordered have arrived by comparing the shipping
forms to the original purchase order. Inspect all shipping containers.
If your shipment is damaged or incomplete, save the packing materials and
notify both the shipping carrier and the nearest Agilent Technologies sales and
service office. Agilent Technologies will arrange for repair or replacement of
damaged or incomplete shipments without waiting for a settlement from the
transportation company. Notify the Agilent Technologies customer engineer of
any problems.
2 Make sure that the serial number and options listed on the instrument's rear-
panel label match the serial number and options listed on the shipping
document. The following figure is an example of the rear-panel serial number
label.
Figure 1-1. Serial number label
1-4