The Agilent 83487A-At A Glance - Agilent Technologies 83487A User Manual

The Agilent 83487A—At a Glance
The Agilent 83487A optical/electrical plug-in module is one of several plug-in
modules available for the Agilent 83480A, 54750A mainframes. The main fea-
tures of the Agilent 83487A are:
• Integrated, calibrated optical channel.
• 2.85 GHz optical channel bandwidth and user selectable 12.4 or 20 GHz
electrical channel bandwidth.
• 750 nm to 860 nm wavelength range.
• Optical channel has 1063/1250 Mb/s datacom filters.
• 62.5/125 µm (maximum) multimode, user selectable optical input connector
option.
• Electrical measurement channel.
• Trigger channel input to the mainframe.
• 3.5 mm (m) connectors on the electrical measurement channel and trigger
channel.
• One probe power connector.
• One auxiliary power connector.
NOTE
If you wish to use the Agilent 83487A optical plug-in module in an Agilent 54750A digi-
tizing oscilloscope, a firmware upgrade must first be installed. Order the Agilent 83480K
communications firmware kit and follow the installation instructions.
The purpose of the plug-in module is to provide measurement channels,
including sampling, for the mainframe. The plug-in module scales the input
signal, sets the bandwidth of the system, and allows the offset to be adjusted
so the signal can be viewed. The output of the plug-in module is an analog sig-
nal that is applied to the ADCs on the acquisition boards inside the mainframe.
The plug-in module also provides a trigger signal input to the time base/trigger
board inside the mainframe.
For GPIB programming information, refer to the Agilent 83480A, 54750A
Programmer's Guide supplied with the mainframe.
The Agilent 83487A—At a Glance
iii