Setting Up The Button Backup Script - Acomdata HD500FPMM User Manual

FIGURE 4
7. Once the files have been installed, in the Finish Up screen you will see the
message: "Installation was successful..." Click Quit.
8. Proceed to the next section: "Setting up the Button Backup Script."
- 50 -

Setting up the Button Backup Script

1. Press the PushButton™ on the front of the mini Pal. You will see the alert
message: "The document you are opening will open the application
'Retrospect' for the first time...?" Click Open.
2. You will be asked to type in your administrator password. This is the pass-
word you use to log in to your computer. Do so, then click OK.
3. You will see the Retrospect license code on the window. Click OK.
4. Next, the display will ask you to register your copy of Retrospect Express.
Click Register Now and complete the registration form that appears.
5. The Retrospect
Button Backup wiz-
ard should appear
(Figure 5). If it
does not, press the
PushButton™. In the
Retrospect Button
Backup wizard, click
Next. You will be
taken through three
easy steps to setup
the script.
FIGURE 5
- 51 -