Installing Acomdata Pushbutton™ Manager - Acomdata HD500FPMM User Manual

6. Read the license
agreement. Click
Accept to accept the
terms and continue
with the installation.
7. In the Install
Retrospect Express
window (Figure 2)
the default instal-
lation type is Easy
Install. Under Install
Location, the default
location is the main
Applications folder
FIGURE 2
on your startup disk.
Do not change the default settings. Click Install.
8. Once the installation is complete, you will see an alert with the message:
"Installation was successful..." Click Quit.
If you wish to install the AcomData PushButton™ Manager to run backups
via the PushButton™, proceed to the next section "Installing the AcomData
PushButton™ Manager." Otherwise, restart the computer and Retrospect
Express will be ready to use. See the Help menu in Retrospect Express for
instructions and other information.
- 48 -
Installing AcomData PushButton™ Manager
1. In the AcomData PushButton™ Backup CD window, double-click the
DMBtMgr_Install icon.
2. You will see the
message displayed
in Figure 3. Click
Continue. Once the
DMBtMgr file has
been copied, a new
window containing
the copied file will
open. Double-click
the DMBtMgr icon in
FIGURE 3
that window.
3. The Authenticate window will appear with the message "Install Retrospect
Express requires that you type your password. " This is the password you use to
log on to your computer. Type in your password and click OK .
4. The DMBtMgr Install window will appear (Figure 4, next page). In the Select
Destination screen, the default location should be your computer's startup
disk. If not, select the startup disk and then click Continue.
5. In the Installation Type screen, the default installation type is Easy Install.
Leave it as is and click Continue.
6. Next, you will see the message: "The installer has all the files necessary to
complete the chosen install." Click Install.
- 49 -