Connecting The Mini Pal To Your Mac Mini - Acomdata HD500FPMM User Manual

Connecting the mini Pal
to your Mac mini
About the supplied
USB and FireWire cables:
Each end of the USB cable has different connectors,
called type A and type B. The 'A' connector plugs into
your computer. The 'B' connector plugs into your
mini Pal.
The connectors on both the USB and FireWire cables
are made to be inserted only one way. When connect-
ing mini Pal to your computer, be sure to correctly
insert the connectors, or you may damage the
mini Pal and void the warranty.
1. Depending on which arrangement you pre-
fer, either set your Mac mini onto the mini
Pal (as shown) or place the mini Pal onto
your Mac mini. Align the two devices so that
they are squarely stacked together. The large,
grippy, rubber pad at the bottom of both
devices will keep them firmly planted.
- 26 -
���������
������������
����������
2. The pins of the small AC adapter plug are off-set so that the
plug can be inserted only one way. Orient the plug correctly and
insert the plug into the Power Port. The plug should not require
much effort to insert. If the plug will not go in, check that the
orientation is correct and try again. Do not force the plug or you
may damage it and/or the mini Pal.
3. Plug the power cord into the socket in the AC adapter. Plug the
other end into an AC outlet.
- 27 -
��������������
��������
��������
����������