Table of Contents
Advertisement
6.6.10 To install the needle bearings in the middle
cover
1. Put the 2 needle bearings into the bearing seats in
the middle cover.
2. Attach the protective tool to a mandrel press. Refer
Servicing tools on page 6 . Push the 2 needle
to
bearings into the bearing seats.
24 - Repair and servicing
6.6.11 To remove the gear selector
•
Remove the screw (A), the washer (B) and the
bracket (C). Remove the gear selector (D) and the
O-ring (E).
D
E
6.6.12 To install the gear selector
1. Put grease on the gear selector.
2. Install the O-ring (E) and the gear selector (D).
Install the bracket (C), the washer (B) and the screw
(A).
D
E
C
B
A
C
B
A
1332 - 001 - 04.03.2021
Advertisement
Table of Contents
