Part Names And Functions - Pro-face GP-2400 Series User Manual

Chapter 2 - Specifications
2.4

Part Names and Functions

A,B
E
D H
(GP-2500 Series, GP-2600 Series)
D P
(GP-2400 Series)
2-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
C
Front
F G
I
Rear
J
F H
L M Q N I
A:Display Panel
The GP monitor screen displays the screen
setup and corresponding host (PLC) data.
(All units)
B: Touch Panel
Performs any screen change operations and
sends data to the PLC.
C: Status LED
This LED reflects the GP's condition.
Color
No power input
OFF
Normal operation
Green
Backlight is burned out
Orange
D: Power Input Terminal Block
Connects the power cord.
E: CF Card Expansion Interface
(GP-2500 Series, GP-2600 Series only)
Not available (Pro-Designer does not
support this interface)
F: Expansion Unit Interface 1
Connects expansion units with communica-
tion features.
G:Expansion Unit Interface 2
Connects expansion units with display
features. (GP-2500T , GP-2600 Series only)
H: CF Card Cover
Open this cover to see the CF Card Slot. When
accessing the CF Card, this cover must be
closed.
I: CF Card Access Lamp
If the CF Card Cover is closed when the CF
Card is inserted, the LED lamp turns ON. The
LED lamp will remain turned ON even if the
CF Card Cover is opened while the GP
accesses the CF Card.
GP-2400/2500/2600 Series User Manual
Indicates