Part Names And Functions - Pro-face PS-3650A Series Hardware Manual

PS-3650A/PS-3651A Series Hardware Manual

1.3 Part Names and Functions

The following images are of a PS-3650A/PS-3651A Series unit.
(Common in PS-3650A/PS-3651A Series)
1-4
Front
A: Power LED / RAS Status lamp (POWER)
This status LED indicates the power current and
operation status. The following table shows the
display colors and corresponding status.
LED
A
Green (lit)
B
Green
C
(blinking)
Orange (lit)
D Orange/ Red
(blinking)
E
Not lit
B: HDD/IDE Access lamp (DISK)
LED
Green (lit) HDD or IDE is accessed.
Not lit Neither HDD nor IDE is accessed.
PS-A unit is in operation with backup
Orange (lit)
battery
PS-A unit is in operation with backup
Red (lit)
battery
C: Front Cover
D: Hardware Reset Switch (RESET)
E: Front USB Interface (USB)
1 port, USB 1.1 Compatible.
Uses a "Type-A" connector.
Power supply voltage
Output current
Maximum
communication distance
Status
Normal operation (power is ON).
System is NOT running (Soft OFF
state).
System monitor error.
Backlight error.
Power is OFF.
Status
DC5V ±5%
Each port:
500mA (max.)
4 ports total:
500mA (max.)
5m