Chapter 3 - Installation and Wiring
3.6
Sound Output
3.6.1 Connecting Speaker Lines
Use the following steps to connect the speaker.
1) Rotate the screw lock terminal block's
two (2) levers in the direction shown
(downward), and remove the screw
lock terminal block.
2) Unscrew #11 pin and #10 pin set
screws (2nd and 3rd screws from the
left).
3) Insert the Speaker's GND line in #11
pin connector, and the SP OUT line in
#10 pin connector.
4) Confirm that each line (cable) is
inserted completely, and retighten the
two (2) set screws.
3-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
GP-2400/2500/2600 Series User Manual