PS-3710A/PS-3711A Series Hardware Manual
1.3 Part Names and Functions
1.3.1
PS-3710A Series
G
Left Side
M
1-6
Front
F
Rear
K
L
Right side
Top
A: Power LED / RAS Status Lamp (POWER)
LED
Green (lit)
Green
A
(blinking)
B
C
Orange (lit)
Orange/Red
(blinking)
D
Not lit
E
B: IDE Access Lamp
LED
Green (lit)
C: Front Cover
D: Hardware Reset Switch (RESET)
H
Used to restart PS-A.
E: USB Interface (USB)
1 port. USB 2.0 compatible.
Uses a "TYPE-A" connector.
Power supply voltage
Output current
Maximum
communication distance
I
F: Arm Insertion Hole Location
VESA 75mm
G: Power Switch
J
AC Power Supply type only (PS3710A-T41)
H: Expansion Board Support
I: FDD Drive
J: DVD-ROM Drive
K: PCMCIA Interface (PCMCIA)
2 ports. PCMCIA Type II, Type III can be available.
Corresponding to CARD BUS (Excluding VIDEO
ZOOM, SOUND functions)
L: PS/2 Keyboard Interface (KEYBOARD)
A mini DIN 6 pin (socket) is used.
M: Rear Cover
PS-A Status
Normal Operation (power is on)
Soft OFF state
System Monitor Error
Touch Panel Self Test Error
Backlight burnout is detected
Power is OFF
PS-A Status
Currently using IDE I/F
5V DC ±5%
Each port:
500mA(max.),
5 ports total:
500mA(max.)
5m