General Safety Precautions - Pro-face GP-2400 Series User Manual

Preface

General Safety Precautions

• Do not strike the touch panel with a hard or pointed object, or press
on the touch panel with too much force, since it may damage the
touch panel or the display.
• Do not install the GP where the ambient temperature can exceed the
allowed range. Doing so may cause the GP to malfunction or shorten
its operation life.
• Do not restrict or limit the GP's naturally occurring rear-face ventila-
tion, or storing or using the GP in an environment that is too hot.
• Do not use this unit in areas where large, sudden temperature
changes can occur. These changes can cause condensation to form
inside the unit., possibly causing the unit to malfunction.
• Do not allow water, liquids, metal or charged particles to enter inside
the GP's case, since they can cause either a GP malfunction or an
electrical shock.
• Do not use or store the GP in direct sunlight, or in excessively dusty
or dirty environments.
• Do not store or use the unit where strong jolting or excessive vibra-
tion can occur.
• Do not store or use the GP where chemicals (such as organic sol-
vents, etc.) and acids can evaporate, or where chemicals and acids
are present in the air.
Corrosive chemicals: Acids, alkalines, liquids containing salt
Flammable chemicals: Organic Solvents
• Do not use paint thinner or organic solvents to clean the GP.
• Do not store or operate the LCD display in areas receiving direct
sunlight, since the sun's UV rays may cause the LCD display's qual-
ity to deteriorate.
• Storing this unit in areas at a temperature lower than is recommended
in this manual's specifications may cause the LCD display's liquid
to congeal, which may damage the panel. Conversely, if the storage
area's temperature becomes higher than the allowed level, the LCD's
liquid will become isotropic, causing irreversible damage to the LCD.
Therefore, be sure to store the panel only in areas where tempera-
tures are within those specified in this manual.
• Do not connect or disconnect the communication cable to the host
machine while the power is ON.
• Due to the possibility of unexpected accidents, be sure to back up
the GP's screen data regularly.
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
GP-2400/2500/2600 Series User Manual