Christie Mirage SST Instruction Sheet page 4

2. Align the four rigging frame base plate holes with the adapter plate mounting holes.
The adapter plate can be installed in the rigging frame in the following four configurations:
3. Install two screws with the flat washer through the plates and into the projector supplied with
the frame as per the required configuration. Torque to 34 Nm.
4. Install two screws with the flat washer (supplied with the frame), lock washer and nut
(supplied with the adapter plate) as per required configuration. Torque to 34 Nm.
Installing the Mirage SST Rigging Frame Adapter Plate Instruction Sheet
020-103164-02 Rev. 1 (08-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installing the Mirage SST Rigging Frame Adapter Plate
4