Christie Mirage SST Instruction Sheet page 3

The projector can be set up in the following four configurations:
4. Install the two flat head capscrews supplied with the adapter plate and torque to 34 Nm.
Installing the projector into the rigging frame
To secure the projector to the rigging frame, follow these procedures.
1. Position the projector with the adapter plate onto the rigging frame base plate.
Ensure that the marked side on the adapter plate is towards the pitch adjuster.
Installing the Mirage SST Rigging Frame Adapter Plate Instruction Sheet
020-103164-02 Rev. 1 (08-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installing the Mirage SST Rigging Frame Adapter Plate
3