Table of Contents
Advertisement
Quick Links
Installing flat panels on
the ML25 wall mount
The ML25 is a full-service video wall mount that can accommodate the Ultra and Extreme Series tiled
LCD panels in landscape orientation, resulting in a combined depth of 101.6 mm (4 in.)
The modular mount system features a pull-out mechanism that provides rear screen access, and the
ability to adjust the X, Y, and Z axis alignment. The mount supports 34 kg (75 lb). The maximum
display sizes of 49", 55", and 65" diagonally.
Features
Use the ML25 wall mounts to hang and adjust the flat panels, and to access the rear of the panels.
•
ADA compliant mounting option for USA.
•
Achieve maximum depth of 101.6 mm (4 in.)
•
Modular mount for large video wall display configurations.
•
Adjustments of panels for optimal gaps.
•
Spring-loaded mechanisms secure displays.
Installing Flat Panels on the ML25 Wall Mount Instruction Sheet
020-001812-01 Rev. 1 (04-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
1
Advertisement
Table of Contents
Related Manuals for Christie ML25
Summary of Contents for Christie ML25
- Page 1 X, Y, and Z axis alignment. The mount supports 34 kg (75 lb). The maximum display sizes of 49", 55", and 65" diagonally. Features Use the ML25 wall mounts to hang and adjust the flat panels, and to access the rear of the panels. • ADA compliant mounting option for USA.
-
Page 2: Safety Warnings And Cautions
• Always handle the display panel from the sides or handles. • Christie products must be installed and serviced by Christie qualified technicians. • Before drilling holes locate electrical, gas, and water lines. • Only install the product on recommended surfaces. -
Page 3: Types Of Installations
Cross bars for 65" panels (Qty. 2) Washer (Qty. 4) Pull handle for 65" panels Right vertical Installing Flat Panels on the ML25 Wall Mount Instruction Sheet 020-001812-01 Rev. 1 (04-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved. -
Page 4: Required Tools
30 °C (86 °F) 35 °C (95 °F) 40 °C (104 °F) The following ventilation requirements are available for FDH554-XZ-HR. Installing Flat Panels on the ML25 Wall Mount Instruction Sheet 020-001812-01 Rev. 1 (04-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved. -
Page 5: Product Documentation
35 °C (95 °F) 40 °C (104 °F) Product documentation For installation, setup, and user information, see the product documentation available on the Christie website. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •... -
Page 6: Installing The Wall Mount
This is the notch location for the first wall mount of the second row. c) Install the wall mounts for all display panels in the next row of display panels. Installing Flat Panels on the ML25 Wall Mount Instruction Sheet 020-001812-01 Rev. 1 (04-2020) Copyright ©... - Page 7 Never attach concrete expansion anchors to concrete or cinder block covered with plaster, drywall, or other finishing material. 8. Place the pull out mount assembly over the anchors and secure it with four #14 x 2.5” screws. Installing Flat Panels on the ML25 Wall Mount Instruction Sheet 020-001812-01 Rev. 1 (04-2020) Copyright ©...
- Page 8 For 55" and 65" display panels, insert the spacer between the adapter brackets and the display panel before attaching the brackets with the M8 socket pin screws. Installing Flat Panels on the ML25 Wall Mount Instruction Sheet 020-001812-01 Rev. 1 (04-2020) Copyright ©...
- Page 9 4. To hang the adapter brackets onto the wall mount, attach the top hooks of the brackes to the top cross bar on the wall. Align the bottom hooks with the bottom cross bar and gently slide it into position. Installing Flat Panels on the ML25 Wall Mount Instruction Sheet 020-001812-01 Rev. 1 (04-2020) Copyright ©...
- Page 10 1. Using a 4mm pin hex wrench, loosen the security screws holding the panel adapter brackets onto the wall mount. 2. Slide the panel to the left or right as necessary. 3. Tighten the security screws. Installing Flat Panels on the ML25 Wall Mount Instruction Sheet 020-001812-01 Rev. 1 (04-2020) Copyright ©...
- Page 11 LCD panels above it. To avoid damaging the LCD panel always release both locking tabs at the same time and move the panel forwards evenly. Installing Flat Panels on the ML25 Wall Mount Instruction Sheet 020-001812-01 Rev. 1 (04-2020) Copyright ©...
-
Page 12: Technical Support
• Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com • Asia Pacific: +65 6877-8737 or Support.APAC@christiedigital.com Installing Flat Panels on the ML25 Wall Mount Instruction Sheet 020-001812-01 Rev. 1 (04-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.