Om13 Kit - Emerson KEYSTONE OM13 EPI-2 Installation And Maintenance Instructions Manual

KEYSTONE OM13 - EPI-2 3-WIRES MODULE
INSTALLATION AND MAINTENANCE INSTRUCTIONS

4. OM13 KIT

The OM13 kit consists of the following parts
(see Figure 49):
- OM13 modulating input/output module
- 3 pcs metal spacers
- 1 pc metal exagonal spacer 15 mm
- 3 pcs metal exagonal spacers 25 mm
- 1 plastic spacer
- 1 flat cable with connectors
- 3 screws M3x8
- 4 screws M3x10
This kit allows to assemble optional module
OM13 over all different EPI-2 models.
Depending on models, only some spacers and
screws has to be used.
Refer to tables below and Figure 50 to choose
the correct mechanical parts.
EPI-2 CROSS REFERENCE TABLE (NON US MARKET)
Actuator model
Product coding chart
digit X X 1-phase
7 8
Product coding chart
digit X X 3-phase
7 8
A
B
C
D
EPI-2 CROSS REFERENCE TABLE (US MARKET)
Actuator model Old E006-E013
Product coding chart
digit 6 1-phase
Product coding chart
digit 6 3-phase
A
B
C
D
Figure 50
Points A, B, C and D to fix the board on
standard group
Old 63-125 Old 250-2K
UV - VU UV - VU
31, 32, 33 31, 32, 33
1, 11 11
2, 12 12
3, 13 13
14 14
Old E025-E171
0 - 4 0 - 4
1, 2, 3 1, 2, 3
1, 11 11
2, 12 12
3, 13 13
14 14
Figure 49
New 63-125 New 250-2K
LV - HV LV - HV
3A, 3B, 3C 3A, 3B, 3C
4, 8 5, 8
1, 11 6, 9
2, 12 7, 10
15
New E006-E013 New E025-E171
L - H L - H
A, B, C A, B, C
4, 8 5, 8
1, 11 6, 9
2, 12 7, 10
15
Figures 51-54 allow to distinguish old version
of EPI-2 from the new version (on the labels
are underlined the digits of Product Number);
furthermore, the logic boards with heatsink
identifies old version models, while logic boards
without heatsink identifies new version models.
Figure 51
Label for NON US MARKET - Digits X
product coding chart
Figure 52
Label for US MARKET – Digit 6 on product
coding chart
Figure 53
Example of EPI-2 old version (heatsink present)
Figure 54
Example of EPI-2 new version (heatsink not
present)
X on
7 8
9