Emerson KEYSTONE OM13 EPI-2 Installation And Maintenance Instructions Manual page 7

KEYSTONE OM13 - EPI-2 3-WIRES MODULE
INSTALLATION AND MAINTENANCE INSTRUCTIONS
• Remove the 3-wire power connector cable
from the power card (Figure 41).
• Screw the 3 spacers and unscrew the screw
that fixes the motor cable (Figure 42).
• Place the OM13 card onto the spacers and
tighten the 4 screws (Figure 43).
• Reconnect the 8-pins connector cable, the
4-pins connector black cable and the 4-pins
connector white cable (Figure 44).
• Connect the 3-wire power connector cable
from the terminal board to the OM13
(Figure 45)
• Connect the 2-wire power connector cable of
the OM13 card to the power card (Figure 46).
Figure 41
Figure 43
Figure 45
Figure 42
Figure 44
Figure 46
7