Fault History And Statistical Data - Toshiba TE Series Instruction Manual

Low voltage digital solid state soft starter 18 – 1250a

Hide thumbs Also See for TE Series:

Instruction manual (99 pages)

Quick start up manual (38 pages)

Table Of Contents

Table of Contents

Basic Installation and Operation Guide

(See Chapter 7)

Table 5.6.12.a: Fault History Configuration

58 |

P a g e

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com

5.6.12

F085 – F097 contain the Fault History and Statistical data for the Run

Mode.



5.6.12.a

Fault codes for each of the three latest events are stored with time

and date stamps; see Chapter 7 for a complete list of fault codes and

corresponding error displays.

Time stamps use the 24hr HH.MM format, so for example 3:19 PM

would display as [15.19]

Date stamps use the MM.DD format, so for example September 3

would display [09.03]

(Latest Fault)

Fault code:

Time Stamp

(HH.mm)

Date Stamp

(MM.DD)

F085 = Latest Fault Code (Fault #1)

Factory Setting = 0 (No Fault)

Range = 0 – 27

This Function displays the Fault Code of the latest fault event.

F086 = Time Stamp of the Latest Fault

Factory Setting = 00.00 (No Fault)

Range = 00.00 – 23.59 (24hr time format)

This Function displays the time of the latest fault event.

F087 = Date Stamp of the Latest Fault

Factory Setting = 00.00 (No Fault)

Range = 01.01 – 12.31

This Function displays the date of the latest fault event.

F088 = Same as F085 except for the Previous Fault (Fault #2)

F089 = Same as F086 except for the Previous Fault.

F090 = Same as F087 except for the Previous Fault.

F091 = Same as F085 except for the Oldest Fault (Fault #3)

F092 = Same as F086 except for the Oldest Fault

F093 = Same as F087 except for the Oldest Fault

TE Series Digital Solid State Soft Starters 18 – 1250A