The Te Function List - Toshiba TE Series Instruction Manual

Basic Installation and Operation Guide
Fn # Group
F001
F002
F003
F004
F005
F006
-
F009
Table 5.5.1: Motor and Overload Function Group
Fn # Group
F010
F011
F012
F013
F014
F015
F016
F017
F018
Table 5.5.2: Starting Mode Function Group
30 | P a g e
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
5.5

The TE Function List

5.5.1 Motor FLA, Service Factor and Overload Protection
Functions
Function Description
Motor Nameplate FLA
FLA must be programmed for
starter to function.
Motor Nameplate
Service Factor
Overload Class During Start
Overload Class During Run
Overload Reset
Reserved for factory use
5.5.2 Starting Mode Functions
Function Description
Ramp Type Selection:
VR = Voltage Ramp
CR = Current PID Ramp
1 = Ramp 1, 2 = Ramp 2
Initial Torque (VR) of Ramp 1
Initial Torque (CR) of Ramp 1
Accel Ramp Time of Ramp 1
Max Current Limit of Ramp 1
Initial Torque (VR) of Ramp 2
Initial Torque (CR) of Ramp 2
Accel Ramp Time of Ramp 2
Max Current Limit of Ramp 2
TE Series Digital Solid State Soft Starters 18 – 1250A
Adjustment / Display Range
50-100% of Max Amp Rating.
Upper limit of range automatically
adjusts downward as Service factor
is increased.
1.00 - 1.30 SF
NEMA / UL Class 5 - 30
NEMA / UL Class 5 - 30
0 = Manual
1 = Auto
2 = Disabled Overload
Adjustment / Display Range
Setting 1 = VR1 + VR2
Setting 2 = CR1 + CR2
Setting 3 = VR1 + CR2
Setting 4 = CR1 + VR2
0-100% Line Voltage
0-600% Motor Current
1-120 seconds
200 - 600% Motor Current
0-100% Line Voltage
0-600% Motor Current
1-120 seconds
200 - 600% Motor Current
Setting Factory
Section
Increments Setting
1 amp 0
0.05 1.0 SF
5.6.1
5 Class 10
and
3.2
5 Class 10
0
1
(Manual)
Setting Factory
Section
Increments Setting
1
1
VR1+VR2
5.6.2
and
1% 60%
Append.
1% 200%
10
1 second
seconds
1% 350%
1% 60%
5.6.2,
1% 200%
Append.
10
and
1 second
seconds
4.2.5.b
1% 350%
1
1