Moog T200 User Manual page 4

T200 User's Manual
T200 Servo-Drive Manual Overview
This manual is broken into 11 sections and 1 Appendix.
Section 1 is an overview of the functionality of the T200 Product Family. It outlines technical features and data of the
T200.
Section 2 is description of critical safety issues. It also outlines particular installation and configuration items that the
user must implement if the target machine installation is required to be CE-Marked. This section should be read by all
users, especially those who are installing a T200 for the first time.
Section 3 describes installation and wiring for the T200 and the servo-motor. It describes T200 mounting, terminal
connections and external components.
Section 4 is a description of Moog motors. It deals with motor mechanical issues. Section 4 also outlines how to
configure the T200 servo-drive for standard and non-standard motors.
Section 5 is a Quick-Start guide, for use with WinDrive, the MS-Windows setup and monitoring package.
Section 6 is a functional description of the T200. It contains explanations of how the Inputs of the T200 affect
functionality and how Outputs reflect status and other information. It describes how to tune control loops.
Section 7 is a description of the WinDrive user interface, including details on motor and optional T200 feature
configuration. It describes how to use WinDrive for tuning and diagnostics.
Section 8 is a description of the Hand Held Terminal user interface.
Section 9 contains wiring instructions on the Controller Area Network interface.
Section 10 is a Troubleshooting guide.
Section 11 contains Sales Outlet information.
Appendix A describes EMC test configurations, under which the T200 was tested for compliance with the European
Union's Electro-Magnetic-Compliance (EMC) Directive, in various T200 model and I/O configurations.
This manual describes the functionality and features of the present version of the T200 Product Family. Not all of
the described features are available in previous versions of the T200.
Information contained herein is subject to change without notification and should not be construed as a commitment by
Moog Inc. This manual is periodically reviewed and revised.
Moog Inc. assumes no responsibility for any errors or omissions in this document. Critical evaluation of the manual by
the user is welcomed. Your comments will assist us in future product documentation.
Copyright © 2000 by Moog Inc. All rights reserved.
PAGE III
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com